Buying a new furnace may not be a concern right away. But it’s smart to learn the things that will likely influence your selection when you’re ready to buy. Here are seven things you’ll want to think about when it’s time for furnace replacement in Memphis.
1. Size and Installation Quality
To operate at maximum efficiency and comfort, your furnace must be properly sized for your home. When it involves furnaces, bigger is certainly not better. We frequently get requests from customers to install a big furnace in the misguided belief that a larger furnace is either more reliable or will provide better comfort.
The reverse is true. Large furnaces will short cycle, or continuously turn on and off. This leaves you uncomfortable, with higher energy bills and a furnace that could need replacing much sooner.
This is why it’s important to work with the right company when buying a new furnace. Even if it’s the right size but installed wrong, the U.S. Department of Energy says you could lose as much as 30% of your energy efficiency.
Another crucial component of installation is ductwork. If yours is old or improperly designed, you might have issues with noise or comfort. A furnace is only as good as the duct system it’s attached to.
At Service Experts Heating & Air Conditioning, our Expert HVAC technicians are ACE certified, which means they’re skilled in repairing and installing various kinds of home comfort systems. Besides technical skill, our technicians are also trained in treating you fairly. We also support our work with a 100% satisfaction guarantee for a year.*
2. Energy Efficiency
Furnaces are rated by a term called AFUE, or annual fuel utilization efficiency. Like miles per gallon on cars, this rates the annual gas consumption of a furnace. The higher the number, the less gas is spent during the heating process.
If your present furnace is 15 years old, it’s likely rated well below 80 AFUE. As an example, if your HVAC system is 70 AFUE, you’re wasting up to 30 cents of each dollar you spend on heating.
Here’s how AFUE ratings work today:
- 80 AFUE—minimum efficiency rating in the U.S. and Canada.
- 90 AFUE—ENERGY STAR® rating for furnaces in the U.S. South.
- 95 AFUE—ENERGY STAR® rating for furnaces in the U.S. North and Canada.
- 98 AFUE—best efficiency rating available.
3. Blower Motor Technology
As you compare new furnaces there is one more important thing to consider: blower technology. This part moves air throughout your home. And it also consumes a lot of electricity, so it’s essential to be familiar with your options.
There are three kinds of blowers available on furnaces today. They include:
- Standard blower motor. Furnaces that aren’t ENERGY STAR rated have a traditional blower motor that’s been relatively unchanged for the past 30 years. This motor is the least expensive and also the least energy efficient.
- Constant torque motor. This technology strikes a balance between cost and energy efficiency. It provides an electrical efficiency boost over a standard motor design.
- Variable-speed motor. The most energy-efficient furnaces can run at different speeds. Instead of running at full blast 24/7, they will quietly operate at a low or medium speed at times. This helps enhance your comfort while keeping energy costs down, both in the winter and summer. And it also keeps indoor humidity under control.
4. Sound Reduction Technology
Sound has become a very important consideration with furnace installation, so another dramatic improvement has been keeping noise under control. Some of these features include:
- Sealed and insulated cabinets
- Variable-speed blower technology
- Nearly silent gas burners
With this technology, you might not even notice that your furnace is running.
5. Smart Thermostat
You probably have a programmable thermostat, but chances are you probably aren’t maximizing your energy savings. These thermostats can be challenging to program, especially if your schedule changes from day to day.
A smart thermostat eliminates all the guessing about energy efficiency. Many models can learn from your temperature preferences and then produce an energy-saving schedule to match. They also know when you’re home or away and will adjust your heating and cooling as necessary.
As an extra perk, you’ll also be able to monitor and adjust your settings from just about anyplace on your phone. Some models can even notify you if they detect a problem with your furnace or remind you when it’s time to change your air filter.
6. Warranty
There’s a major difference in furnace quality and reliability. Like any big purchase, we believe it’s best to go with a major brand name. With a leading brand like Lennox® or Goodman®, you’ll have more assurance in the technology and that the manufacturer will uphold its product warranty over the long haul.
Furnaces typically have two main warranty coverage areas:
- Heat exchanger. This is the heart of the furnace and the costliest component to replace. This part usually has a 20-year limited warranty or lifetime limited warranty, but this can differ based on the manufacturer and furnace model.
- Main parts. This includes the blower motor, electronic controls, ignitors and other important parts. Warranties can range from as little as a one-year limited warranty to as long as a 10-year limited warranty.
When reviewing warranty coverage, it’s essential to know it's limited. So, you should make sure you understand the restrictions. For instance, nearly all standard manufacturer warranties only cover the cost of the replacement part, not labor. And labor on a replacing heat exchanger could get costly.
Once your new furnace is installed, make sure you finish the product registration right away. Many manufacturers may limit the warranty term if the product registration is not done. This step is easy and usually only takes a few minutes.
7. Cost
How much does all this cost anyhow? It could vary from $1,700 for a basic furnace, or $5,500 or more for a high-efficiency model.
As you consider these costs and the affect on your budget, keep in mind that unlike nearly every other appliance you may need to purchase, your new furnace may help pay for itself from the monthly energy savings it provides.
A couple of other ways to save include:
- Replacing your air conditioner simultaneously.
- Buying at the ideal time, such as in early fall, mid-winter and early spring. You may be able to get additional discounts and rebates during this slower season.
- Take advantage of rebates from the federal and state government, as well as from your local utility company. We can help you figure out this process.
- Finance your new furnace or enroll in our exclusive HVAC Advantage Program™. For just one low monthly fee, you’ll receive a new furnace with repairs and maintenance included.*
How Do I Know When to Replace My Furnace?
Now that you know what to look for in a new furnace, when should you replace your old one? Here are a few tips from our Experts that will help you make that decision.
Age
Heating systems typically last 15–20 years. How long yours will last depends on whether you’ve done furnace maintenance, where you live and your temperature preferences. If you’re somewhere with harsh winters, your furnace will run more frequently, potentially making it wear out faster. The same goes if you like to keep your home at a warmer temperature.
Repair Frequency and Cost
Just like any appliance, as furnaces age, the potential for frequent furnace repair goes up. If your system is more than 15 years old, those repairs can be particularly costly. Common and costly repairs on an older furnace include:
- Blower motor failures
- Ignition control failures
- Heat exchanger failures
If repairs are more than the half the price of a new furnace, it’s generally recommended to replace it.
Energy Efficiency
Furnaces older than 15 years can be very inefficient. You could be throwing away as much as 30% of the money you spend to keep your home warm. High energy costs and the desire to decrease energy consumption are also strong reasons to think about replacing your furnace. In fact, an independent study by Decision Analyst shows nearly 20% of homeowners who recently replaced their furnace specifically did so to reduce their utility bills.
Trust Your Furnace Replacement to the Experts
It can feel overwhelming trying to research furnace features on your own. Or recognize exactly when you should get a new furnace. Our Service Experts Heating & Air Conditioning Experts are here to make the process much more convenient. Contact us at 901-235-1196 or schedule an appointment online to request your free home comfort assessment today.
*For HVAC Service Memberships, certain warranty exclusions and limitations apply. See your signed agreement for full terms and conditions. For the Advantage Program™, please see your signed Advantage Program Agreement for full details and exclusions. Lease with approved credit; visit ServiceExperts.com for details.